5-Jet Nozzle
This nozzle is the most widely used nozzle for coating removal. The 5-jet nozzle works perfectly for removing marine and industrial coatings. You can run two lances off one Husky pump while cleaning a 3 inch wide strip with each pass. The 5-jet can also be used for light concrete scarification where either the coating is removed from the concrete or the concrete itself needs to be lightly scarred.

4-Jet Nozzle
The 4-Jet nozzle is used for removal of tough coatings when your nozzle requires extra cutting power. Typical uses are removing rubber tank linings or thick fiberglass coatings. This nozzle can also be used for accessing tight spots and precision cut-in work.

9-Jet Nozzle
Use this tip for two applications. First, for very light coatings that do not take the concentrated energy of a 5-jet nozzle, the 9-jet allows you to remove coatings faster because it cleans a much wider path with each pass. Second, the 9-jet works very well for sweeping work where only a layer of paint needs to be removed.

5-Jet 90 Degree (Commonly Called a Pineapple)
This nozzle has ports firing to the sides and is used to clean the blind sides of structural angles where a regular nozzle cannot reach.

5-Jet Fan Jet
This nozzle works exceptionally well for removing one layer of coating at a time. The fan style jets won't leave swirls in the remaining underlying coating, or on aluminum applications.

Rotary Abrasive Induction Nozzle